Welding Cart
Built from an old Tektronix Scope Cart
 
(click the "view image" button or click on the small pictures to display a large picture in a separate window)
1) View from the left side
(rocket launcher?)

2) View from the right side
3) Rod holder, cover off
4) Other rod holders with the covers off
5) View of the front from above showing the drawer open
6) Front of the 200DX
7) The welder shelf tilts up
8) The welder shelf tilts down
9) The old plugin holders are a perfect place for the foot control and cable
10) Scope cart ID plate
11) Front of the whole unit. The two red tubes on the bottom are for SMAW (stick) rods.