Adding a Trailer Hitch
To My John Deere LT155 Mower
(click the small pictures to see a larger picture in another browser window)
Cleaned up for priming.
The whole project was TIG welded.
The cutout in the larger angle iron was done with oxy-acetylene before welding.
Primed with cold galvanizing.
And painted with JD green.
Bolted up with two 1-1/2 inch long 1/2 inch bolts, four flat washers and two nylon insert nuts. I used existing holes in the mower frame.
Here you can see the tranny release and the cutout necessary to clear it.